Electrodepot


  16 Channels Remote Control Digital System RECEIVER
  2 Miles of Line-of-Sight range Up to 10 Miles with
Long Range Antenna
  Over 64,000 Codes, Indoor use enclosure, Power On and RF Activity Indicators


Wiring Diagram  

937016   $659.99 

        Antenna not supplied Select Antenna

Select Transmitter: 
 
1 Ch Transmitter
 
4 Ch Transmitter

 SPECIFICATIONS
 Operating Voltage: 12 to 15.o VDC
 Operating Temperature: -4° to +140° F (-20° to +60° C)
 Receiver Type: Digital 
16 bit Encoded
 Sensitivity: -118 dB (minimum), Selectivity: 6 KHz
 Carrier Frequency: 27,255 MHz
 Number of Codes: 65,536
 Code Setting Method: DIP switch programming
 Data Input: Alarm, restore, status, and low battery
 Antenna Impedance: 50 Ohms
Quarter Wave  Optional Whip 8" Antenna
 
Dimensions: 7.9 in L x 1.25 in W x 6.5 in H (201 x 32 x 165 mm)
 Weight: 1.5 lb. (0.680 Kg)
 Current Drain: 300 mA (max) @ 12 VDC
, typical standby 65 mA alarm @ 12 VDC
 Outputs: Alarm - form "C" relay per channel  Status exception - one open collector output per receiver; 
 Low Battery - one open  collector output per receiver (Audio and signal strength test points)
 Manual  937016

16
outputs are all low current (100mA at 12VDC)  
Power adapter 12 VDC Power relay 10A  Power relay 30A   Latch relay 12V

        


Wiring Diagram
Transmitter 1 Channel
Manual 937101 

 

 


Wiring Diagram
Transmitter 4 Channel

 

 

 

 Warning: Radio control equipment is not to be used in life safety