|
Model: 935144 |
|
Lighting Control |
 |
| |
 |
|
Irrigation |
|
|
|
|
Single
Channel
2,
4, 8 and 16 Channels
available upon request
Contact |
|
Pump or
Lighting remote control system
 |
Applications
|
Pump control |
Lights |
|
Conveyors |
Actuators |
|
Emergency |
Valves |
|
Traffic control |
Packing |
|
Irrigation |
Boats |
|
Fuel Pumps |
Gates |
|
Billboard Signs |
Doors |
|
Beacon lights |
Pumps |
|
Navigation Aid |
Security |
|
Kit
Includes: Portable transmitter, NEMA 4X enclosure with
receiver, power supply, electronic latch control
and wiring diagram.
The wireless LATCH module is an
auxiliary device designed to allow easy
and reliable arming/disarming momentary,
two wire start stop circuit, or with
hand-held wireless remote controls.
Momentary closure with remote will
latch the relay.
A subsequent momentary closure will
unlatch the relay.
Reset can also be done by removing
power from supply
The relay provides N.O. 15Amp. contact,
and can therefore be used with a wide
variety of control applications.
Lighting, gates, and pumps.
Wire directly into
the field controls, Contactors,
PLC, Starters, etc.
. |
|
Specifications and Features
|
-
The LATCH relay provides N.O.
Normally open contact
-
Momentary-to-Toggle
(Bi-Stable) Switching
-
Operating power: 12 VDC and 120 or 220 VAC
-
Optional system to operate
with solar panel, by request
-
Current drain - less than 10mA
(unlatched), 90 mA (latched).
-
Relays output switching capability:
-
15 Amp. 220 V, 1.0HP- 220V, 0.5
HP - 120V
-
10 Amp. Ballast
-
8 Amp. Tungsten
-
Auto reset by power removal
-
NEMA 4X non metallic enclosure
12x10x6inches
( 300 x250x152 mm
)
-
800 feet (250 m) line
of sight
with
extended range antenna
-
Operating Temperature: -4° to +140°
F (-20° to +60° C)
Operating Frequency:
303 MHz
Bandwidth: 6
KHz
Number of Codes: 256
Code Setting
Method: DIP switch programming
|
|
|
|
Home
Cart 
