Single shot relay

Momentary to single shot Electronic Converter

Used to send one one pulse only in the event of a contact closure
When the coil is energized the main contacts will close for 3 seconds and open again until a new contact closure occurs.
Use full for the activation or pulse transmission in wireless remote controls.
The relay provides N.O. and N.C. contacts, and can therefore be used with a wide variety of control applications

Features - Specifications

Replaces the normal ON to one pulse circuit.
Momentary or continuous closure sends one pulse of 3 seconds
Operating power - 12 VDC 10%.
Current drain - less than 0.01mA (pulse),
30 mA 3 seconds adjustable
Relays switching capability – 10 A 125 VAC SPDT.
DIN mount

Operation: Upon momentary or maintained power application to the coil the output contact is energized for the interval time. At the end of the delay the output de-energizes. Reset occurs when the time delay is complete.
New pulse allowance 10 seconds

Application: Transmitter